NitroTek
GS RACING SHADOW SB1 NITRO RC BUGGY
| 450mm | |
| 326mm | |
| 150mm | |
| 50mm | |
| 296mm | |
| F/R 265mm | |
| 2350g | |
| Infinity .18 rear exhaust |
- ,
- 2.4G radio gear ,
- ,
- 100% factory assembled 1/10th scale race buggy ,
- Over 50% compatible with Shadow ST1R series truck ,
- Fully fitted with precision ball bearings ,
- Unique rear exhaust system ,
- Powerful Team Infinity .18 Pull Start Engine ,
- Pre-glued off road tyres on GS super buggy wheels ,
- Pre-painted and trimmed Kom Designs body with decals ,
- Front universal driveshafts ,
- Long travel, coil over, impact absorbing oil filled shocks. ,
- 4WD transmission with center slipper clutch ,
- GS high performance crown gear and pinion gear made of powder metallurgy steel ,
- GS "Competition Line" high quality race differential gears ,
NitroTek
GS RACING 1:9 SCALE MITSUBISHI PAJERO CONQUEROR NITRO RALLY TRUCK
| 490mm | |
| 230mm | |
| 210mm | |
| 29mm | |
| 304mm | |
| 2350g | |
| C47/13T, F/R |
- ,
- Track: F: 198mm R: 200mm ,
- 2.4G radio gear ,
- ,
- 100% factory assembled 1/8th scale race buggy ,
- Over 50% compatible with Shadow SB1 series Buggy ,
- Fully fitted with precision ball bearings ,
- Tuned rear exhaust system ,
- Powerful Team Infinity .18 Pull Start Engine ,
- GS 1/9th Pre-glued rally wheels on Mitsubishi Pajero Wheels ,
- Pre-painted and trimmed Kom Designs body with decals ,
- Front Universal driveshafts ,
- All new design GS rally car suspension system ,
- Front and rear sway bar system ,
- GS "Competition Line" high quality race differential gears ,
- GS high performance crown gear and pinion gear made of powder metallurgy steel ,
- 4WD transmission with center slipper clutch ,
This is a real innovation from GS and is a ...
NitroTek
GS RACING ST1 1/10 NITRO RADIO CONTROLLED TRUGGY
| 430mm | |
| 330mm | |
| 155mm | |
| 28mm | |
| 295mm | |
| F/R 265mm | |
| 2213.8g |
- ,
- 2.4G radio gear ,
- 75cc fuel tank ,
- ,
- 100% factory assembled 1/10th scale truck ,
- Over 50% compatible with Shadow ST1R series truck ,
- Fully fitted with precision ball bearings ,
- Tuned .18 exhaust system ,
- Powerful Team Infinity .18 Pull Start Engine ,
- Pre-glued off road tyres on GS super truggy wheels ,
- Pre-painted and trimmed Kom Designs body with decals ,
- Front Universal driveshafts ,
- Long travel impact absorbing oil filled shocks ,
- 4wd transmission with centre slipper clutch ,
- Front/rear sealed gear diffs ,
- Ultra thick and durable suspension arms with capture hinge pins ,
- Low profile radio tray ,
- Taiwan high quality build and components ,
NitroTek
GS RACING XUT II PRO 1/8TH NITRO RADIO CONTROLLED TRUGGY KIT
| 530mm | |
| 420mm | |
| 215mm | |
| 75mm | |
| 370-375mm | |
| F/R 330-360mm | |
| 4130g |
- ,
- Gear Ration: C:58/13T, F/R:38/11T ,
- ,
- Pro Spec 1/8th Scale Race Truggy kit ,
- Pre-fitted with GS optional upgrade parts ,
- Full Precision Engineered Ball Bearings ,
- GS Dish Truggy Wheels with GS Cubic Truggy Tires ,
- Full CVD drive shafts ,
- Front and rear long stroke racing shocks ,
- New lightened chassis ,
- Adjustable 5mm steering plate with ball bearing set ,
- Aluminium wing joint set ,
- GS High performance aluminium 35mm fly wheel ,
- GS professional fuel filter set ,
- Lightened front/rear diff. outdrive ,
- Front and rear aluminium chassis stiffener ,
NitroTek
GS RACING STORM CLX PRO 1/8TH NITRO RC BUGGY KIT
| 510mm | |
| 200mm | |
| 60mm | |
| 326-330mm | |
| 10.5 | |
| 3300g |
- ,
- Track: F:305mm, R:307mm ,
- ,
- Adjustable wheelbase with long travel suspension front and rear ,
- Ferodo brake pads with vented brake discs ,
- Zero bump steer 20 degree C-hub/knuckles ,
- Compact and balanced chassis layout ,
- Forward mounted double stage air filter and integrated splash guard ,
- Front filter and PT mount included ,
- Captured hinge pin design front and rear. All arms can be used left or right ,
- Adjustable front upper and lower arm position settings ,
- Easy access radio box with optional plate if on/off switch is not used roll center ,
- Rubber sealed bearings throughout ,
- Adjustable Ackerman and ball bearing supported bell cranks ,
- 7075 CNC lightweight narrow chassis with steel droop stops ,
- Lightweight 10T hardened helical cut pinion gears ,
- Full set of lightweight CV driveshafts standard ,
- Hard anodized wheel nuts with covered wheel nuts standard ,
- Lightweight outdrives and lightweight 40T conical gears mated to small diameter differentials ,
- Lightweight 42T spur gear, 2 piece center diff mount　with off center brake cams and integrated brake disc　guides ,
- Aluminum 3 shoe clutch with 5x11mm bearing　equipped 16T bell ,
- 16mm Aluminum threaded shocks with optional springs and pistons standard ,
NitroTek
GS RACING CLXE 1/8TH ELECTRIC RC BUGGY KIT
| 1/8th | |
| 510mm | |
| 200mm | |
| 60mm | |
| 326-330mm | |
| 305mm | |
| 307mm | |
| 10.5 | |
| 3600g | |
| 0px; padding | |
| 0px; padding | |
| 0px; padding | |
| 0px; padding | |
| 0px; padding | |
| 0px; padding | |
- ,
- ,
Leaving behind old traditions and taking buggy design to a ...
NitroTek
AOWEI 1/5TH SCALE 26CC YAMA PETROL RC BUGGY 2.4GHZ
| 18kgf.cm/22kgf.cm; Throttle | |
| ≥200m | |
| 1/5 | |
| 80km/h | |
| Speedup, Forward, Turning Left & Right | |
| Rear 2WD Drive System | |
| Twin Rear Disc Brake | |
| single cylinder, two stroke, air-cooled, 26cc | |
| Gasoline Octane (93# or above) /+ Synthetic Oil (25 | |
| 0.5L | |
| Pull Start | |
| 170X60mm(F) / 170X80mm(R) | |
| 520mm | |
| 350mm(F) / 360mm( R ) | |
| 6.5/8.5(F/R) |
- ,
- Receiver(2.4G for racing ,Ni-H batteries 5x1.2v(2Channels) ,
- ,
- 2WD Twin Rear Disc Brake ,
- High Quality 2.4GHz Radio ,
- High Performance 26cc Engine ,
- Full-assembled Aluminium Chassis ,
- Fully Proportional Steering and Throttle ,
- Fully Adjustable Oil-filled Shock Absorbers ,
- Differential with the Built-in Gears ,
NitroTek
GIANT AIRWOLF RTF 4CH RC HELICOPTER WITH LIPO BATTERY (7.4V 1500MAH)
| 1.5-2 Hours | |
| 8 minutes | |
| 80M | |
| 100 M | |
| 35.066MHZ, 35.120MHZ, 35.180MHZ | |
| Up/Down, Left/Right Rotation, Forward/Backward, Left/Right |
- ,
- 7.4V 1500mAh Lithium Rechargeable battery pack ,
- ,
- LARGE SCALE ,
- 4 Channel Full RC system ,
- Installed fast servos and 4-in-1 control unit ,
- Dual motors makes the Airwolf powerful and efficient ,
- FULLY ASSEMBLED ,
- READY TO FLY ,
NitroTek
AIRWOLF 4CH RC HELICOPTER WITH LIPO BATTERY
| 7.4V Li-po 600mah | |
| around 60m | |
| 8-10 minutes |
- ,
- Product Size 42*34*18.50(cm) ,
- ,
- 4 Ch Remote Control ,
- Counter Rotating Blades ,
- Plastic Realistic Body ,
- Flashing LED Lights ,
- Detailed Paint Job ,
- Uses ultra tough iron-fiber materials ,
- New servo and mixer system ,
- Powerful lithium battery ,
- Micro servos, receiver, Gyro and Speed controller/mixer ,
NitroTek
APACHE AH-64 FERAL-BEAST 4CH RC HELICOPTER WITH 2.4GHZ REMOTE CONTROL
| 400mm, Height | |
| 520/570mm Motor | |
| Nylon plus firberglass | |
| Up & down, left & right, forward & back and rotate | |
| Lipo Battery | |
| 1 hour | |
| 10-12 minutes | |
| 100m+ |
- ,
- 4 channel radio control duel rotor system ,
- 2 Servos ,
- PG03 gyro ,
- ON / OFF Switch ,
- ,
- 2.4Ghz Four Channels Radio Equipment ,